(B)學術會議論文(Conference Papers)

  1. Kuang Li Yang, D. Y. Sha, Yung-tsan Jou, 2018.9, "Use the service gap model to analyze delivery processes to improve the Level of Service(LOS) and Customer Satisfaction of E-Commerce physical home logistic in Taiwan Area", 16th Asian Network for Quality, Almaty, Kazakhstan.
  2. Kuang Li Yang, D. Y. Sha, Yung-tsan Jou, 2017.10, "Improving the Overall Passenger Service Quality of the International Airport: Through Developing Innovative Service to Satisfy Tourist's Potential Travel Demands", International Multi-Conference on Engineering and Technology Innovation, Hualien, Taiwan.
  3. Chien Pin Huang, Yung-Tsan Jou, Yung-Jye Sha,2016.7, "A study on Incorporating Personality and Artificial Neural Networks to Establish Predictive System for Employee's Performance", 2016 International Symposium on Economics and Social Scuence (ISESS-summer), Kyoto, Japan.
  4. 李碩、蕭詠今、沙永傑等, 2014.9, "運用TRIZ創新製藥冷凍乾燥製程", 2014中華萃思學會學術與實務研討會暨第七屆海峽兩岸創新方法研討會論文集. (彰化)
  5. 林信宏、黃崑智、沙永傑, 2013.8, "國際TRIZ學術研究趨勢分析與展望", 第六屆海峽兩岸創新方法(TRIZ)研討會論文集. (天津)
  6. 沙永傑、許勝源、吳清城, 2012.11, "整合TRIZ方法與綠色設計開發新產品－以環保修正帶為例", 2012中華萃思(TRIZ)學會學術與實務研討會暨第五屆海峽兩岸創新方法研討會論文集. (新竹)
  7. 沙永傑、許勝源、陳宏益, 2012.11, "結合系統化創新方法與品管歷程建構問題解決流程", 標楷體;2012中華萃思(TRIZ)學會學術與實務研討會暨第五屆海峽兩岸創新方法研討會論文集. (新竹) (最佳論文獎)
  8. 林信宏、黃崑智、沙永傑, 2012.11, "台灣TRIZ研究趨勢分析與展望", 標楷體;2012中華萃思(TRIZ)學會學術與實務研討會暨第五屆海峽兩岸創新方法研討會論文集. (新竹)
  9. D. Y. Sha, Guo-Liang Lai, 2012.6, "Improving Service Quality of Retail Store by Innovative Digital Content Technology", 2012 3rd IEEE International Conference on Software Engineering and Service science(ICSESS 2012), Beijing.
  10. 沙永傑、許勝源、簡毓汝, 2011.12, "整合TRIZ四十發明原則與演化趨勢探討產品創新之潛力", 第四屆海峽兩岸創新方法(TRIZ)研討會論文集. (哈爾濱) (優秀論文獎)
  11. 沙永傑、鄭紹材、吳誌銘, 2011.12, "應用TRIZ方法探討室內裝修安全防護具之開發實例-以圓盤鋸為例", 第四屆海峽兩岸創新方法(TRIZ)研討會論文集. (哈爾濱)
  12. D. Y. Sha, Kun-Chih Huang, P.K. Chen, 2010.12, "A Study on the Key Factors of Design Chain Effectiveness", The 11th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS2010), Melaka, Malaysia.
  13. 沙永傑、蕭倍昌, 2010.11, "應用TRIZ演化趨勢探討企業服務創新–以台灣速食連鎖餐飲業為例", 中華萃思(TRIZ)學會第五屆學術與實務研討會暨第三屆海峽兩岸創新方法研討會論文集. (台中)
  14. 林信宏、林建江、沙永傑, 2010.11, "應用TRIZ方法於MOD使用者介面之創新設計", 中華萃思(TRIZ)學會第五屆學術與實務研討會暨第三屆海峽兩岸創新方法研討會論文集. (台中)
  15. D. Y. Sha, Hsing-Hung Lin, 2010.3, "A Modified Particle Swarm Optimization for Multi-objective Open Shop Scheduling", Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS 2010), Hong Kong, pp. 1844-1848.
  16. D. Y. Sha, Hsing-Hung Lin, 2009.12, "A novel particle swarm optimization for multi-objective job-shop scheduling", Proceedings of the 10th Asia Pacific Industrial Engineering & Management Systems Conference (APIEMS2009), Kitakyushu, Japan. pp. 397-404.
  17. D. Y. Sha, Hsing-Hung Lin, 2009.07, "A Multi-objective PSO for Job-shop Scheduling Problems", Proceedings of the 2009 International Conference on Computers and Industrial Engineering (CIE39), France.
  18. D. Y. Sha, Hsing-Hung Lin, Oct. 2008, "A Multi-objective Particle Swarm Optimization for Flow Shops Scheduling Problem", Proceedings of the 2008 International Conference on Computers and Industrial Engineering, Beijing-China. pp. 233-241.
  19. D. Y. Sha, Hsing-Hung Lin, Dec. 2008, "A Pareto Archive Particle Swarm Optimization for Multi-objective Flowshop Scheduling", Proceedings of the 2008 Asia Pacific Industrial Engineering & Management Systems Conference, Bali - Indonesia. pp.2269-2277.
  20. D. Y. Sha, P. K. Chen, Yung-Hsin Chen, 2007.12, "Exploring the Effects of Advanced Manufacturing Technologies and E-Commerce in Supply-Chain Coordination – An Empirical Study", Proceedings of the 2007 APIEMS & CIIE Conference , Kaohsiung, Taiwan, ROC. Paper ID: 537.
  21. 沙永傑, 黃義鈞,2007.12,"以萃思方法(TRIZ)建構系統工程設計模式之研究" , 中華萃思(TRIZ)學會第二屆學術暨實務研討會論文集 ,新竹.
  22. 沙永傑, 廖文進,2007.12,"萃思方法(TRIZ)之實務應用-以液晶螢幕翻轉裝置為例" , 中華萃思(TRIZ)學會第二屆學術暨實務研討會論文集 ,新竹.
  23. 沙永傑, 潘進丁,2007.12."應用TRIZ方法探討產品開發流程之改善-以筆記型電腦關鍵組件樞軸(Hinge)為例" , 中華萃思(TRIZ)學會第二屆學術暨實務研討會論文集 ,新竹.
  24. Yung-Hsin Chen, Shuo-Chang Tsai, D. Y. Sha, Jui-Chen Hsu, 2007.10, "Exploring the Quality of & Segmentation Task in a Customer Knowledge Management Process", Proceedings of the5th Asian Quality Congress, Korea. pp. 187-194 (Best Paper Award)
  25. 沙永傑, 陳岳民, 陳楨婷, 2007.07, "TRIZ四十發明原則于休閒農業之應用", 第五屆海峽兩岸鄉村旅遊發展學術研討會論文集, pp. 136-148. (昆明)
  26. D. Y. Sha, C. J. Yang, Ilanson C.W. Huang, 2007.5, "A study on integration of tool and vehicle dispatching in 300mm wafer fab", Proceedings of the 2007 IIE Annual Conference IERC, Nashville, Tenn., U.S.A. pp. 1648-1653.
  27. 張庭彰, 李俊璋, 林君儒, 吳天方, 沙永傑, 2007.04, "史耐爾公司組織診斷之個案研究", 第六屆兩岸產業發展與經營管理-個案分析學術研討會論文集-C4 (蘇州)
  28. 張庭彰, 黃尹政, 邱若堯, 吳天方, 沙永傑, 2007.04, "成衣業倉儲控管診斷個案-以M有限公司為例", 第六屆兩岸產業發展與經營管理-個案分析學術研討會論文集-D3.
  29. 張庭彰, 林政維, 陳惠媛, 吳天方, 沙永傑, 2007.04, " 無毒農業營銷推廣之個案報告 -以M 公司為例",第六屆兩岸產業發展與經營管理-個案分析學術研討會論文集-B12.
  30. D. Y. Sha, Cheng-Yu Hsu, 2006.12, "A particle swarm optimization with parameterized active schedules for the open shop scheduling problem", Proceedings of the 2006 CIIE Annual Conference, Taichung.
  31. 劉季昌, 陳永信,沙永傑, 2006.10, "TRIZ 創新設計原則應用於汽車 Telematics平台開發之個案研究",第一屆萃思創意學術暨實務研討會論文集, A1-4.新竹
  32. 沙永傑, 何旭正, 2006.10, " 以抽樣方法分析台灣專利案件之創新層級與發明原則",第一屆萃思創意學術暨實務研討會論文集, B1-3. 新竹
  33. 沙永傑, 王方文, 2006.10, " 應用六標準差設計 (DFSS)及系統化創新方法(TRIZ) 建構產品設計流程 ", 第一屆 萃思創意學術暨實務研討會論文集, C3-2.新竹
  34. 沙永傑, 林信宏, 2006.10, " 運用 TRIZ方法解決室內RFID 定位問題之研究 ", 第一屆 萃思創意學術暨實務研討會論文集, A3-2.新竹
  35. Chi-Chang Liu, Yung-Hsin Chen,Shien-Rong Wu, D.Y. Sha, 2006.8, "The cost effective product realization of automotivetelematics platform", Proceedings of the 8th International Symposium on Advanced Vehicle Control (AVEC 2006),Taipei, Taiwan, ROC .
  36. D. Y. Sha, C. J. Yang, 2006.6, "A study on distance trend of vehicle's empty trip in 300mm automated material handling system", Proceedings of the 36th International Conference on Computers and Industrial Engineering (ICCIE 2006), pp. 4239-4250, Taiwan, ROC (session chair).
  37. D. Y. Sha, Cheng-Yu Hsu, 2006.6, "A modified parameterized active schedule generation algorithm for job shop scheduling problem", Proceedings of the 36th International Conference on Computers and Industrial Engineering (ICCIE 2006), pp. 702-712, Taiwan, ROC.
  38. 沙永傑, 陳屏國, 2006.5, " 供應鏈中規劃與執行間落差問題之探討-以台灣IC 產業為例", 2006 前瞻經營管理學術暨實務研討會論文集, pp. 1397-1405.台中
  39. 許勝源, 沙永傑, 2005.12, " 以資料挖礦為基之晶圓廠交期推估模式", 中國工業工程學會九十四年度年會暨學術研討會論文集, CIIE.374.1 – CIIE.374.4.新竹
  40. S. Y. Hsu, D. Y.Sha, 2005.12, "Design of Dispatching Rule with Rework Considerations in Wafer Fabrication", Proceedings of the Sixth Asia Pacific Industrial Engineering and Management Systems Conference 2005, Manila, Philippines.
  41. Yung-Hsin Chen, D. Y. Sha, Chao-Ton Su, 2005 09 "Attractive Quality Creation via Data Mining for Customer Knowledge", The 3rd ANQ Congress & The 19th Asia Quality Symposium, pp.189-199, Taiwan, ROC.
  42. 沙永傑, 杜德霖,滕步旭, 2005.09, " 應用系統工程建構產品開發之研發聯盟模式", 2005工研院創新與科技管理研討會, pp. 490-497.新竹
  43. Cheng-Hsiang Liu, D. Y.Sha, 2005.05, "The Variation-Indexing Approach for Case-Based Reasoning to Predict the Due Dates in a Dynamic Job Shop", Proceedings of the 2005 IIE Annual Conference IERC, Atlanta, USA. (Session Chair, Session PP8 Production Scheduling)
  44. D. Y. Sha, S. Y. Hsu, X. D. Lai, 2004.12, "Study of Look-Ahead Batching Rule", Proceedings of the Fifth Asia Pacific Industrial Engineering and Management Systems Conference, pp, 27.9.1-27.9.21, Australia.
  45. H. S. Wang, Z. H.Che, D. Y. Sha, 2004,11, "Two-Stage Model for Flow-Shop Production Planning with Different Machines",Proceedings of the 9th Annual International Conference on Industrial Engineering-Theory, Application and Practice, pp.299-304,New Zealand.
  46. D. Y. Sha, Z. H. Che, 2003.12, "Partner Selection and Production/Distribution Planning Decisions in Supply Chain Networks: An Integrated Approach", CIIE Annual Conference, CIIE-2003-219.
  47. 沙永傑, 陳建倫,許勝源, 2003.12, "競爭策略與顧客滿意實證研究—以IC封裝業為例", CIIE Annual Conference, CIIE-2003-175.
  48. D. Y. Sha, Sheng-Yuan Hsu, 2002.11, "The Due Date Assignment in Wafer Fabrication Using Artificial Neural Network", Proceedings of the Seventh Conference on Artificial Intelligence and Application (TAAI2002).
  49. D. Y. Sha, Sheng-Yuan Hsu, Chao-Yang Liu, Cheng-Hsiang Liu, 2001.12, "The Effects of Rework on Order Release and Dispatching in Wafer Fabrication", CIIE Annual Conference, CIIE-2001-0083.
  50. D. Y. Sha, Chao-Yang Liu, Sheng-Yuan Hsu, Cheng-Hsiang Liu, 2001.12, "A Study of Simulated Annealing Algorithm for Integration of Order Review/Release, Dispatching and Rework Strategies in Wafer Fabrication", CIIE Annual Conference, CIIE-2001-0104.
  51. 沙永傑、謝玲芬、林世星，1999.12，「晶圓製造廠微影黃光區再加工策略與派工法則之研究」,中國工業工程學會八十八年度年會論文集, p 110.
  52. 沙永傑、謝玲芬、陳冠任，1998.12，「晶圓製造廠微影黃光區再加工策略之探討」, 中國工業工程學會八十七年度年會論文集第一冊, pp. 30-35.
  53. 陳建文、沙永傑，1997.12，「目標權重決定法則應用於設施佈置問題之研究」，中國工業工程學會八十六年度年會論文集第一冊，pp.40-45。
  54. Li-Hsing Ho, Ling-Feng Hsieh, and D. Y. Sha 1997 12, "The Study on Current Implementation Status of ISO 9000 Series of Construction Industry in TAIWAN, R.O.C," Proceedings of the 1997 CSQC Conference and the Asia Quality Symposium, pp.399-403.
  55. Ling-Feng Hsieh, and D. Y. Sha 1997.10, "The Load Routing Problem of a Tandem Automated Guided Vehicle System," Proceedings of the 2nd International Conference on Material Handling & the 15th International Conference on Automation in Warehousing, Beijing, China, pp. 168-172.
  56. 沙永傑、陳建文，1997.10，「Computer Aided Facility Layout : A Multiple Objective heuristic Approach」，第十屆全國自動化科技學術研討會論文集第一冊，pp.43-50。
  57. Wei Pei, L. H. Ho, and D. Y.Sha, 1996.10, "Research on Applying Fuzzy Theory and Reliability to Material Reorder System," Proceedings of the International Conference on Quality, Yokohama, Japan, pp. 593-598.
  58. 沙永傑、黃靜萩、謝玲芬，1995.12，「區域式無人搬運車與製造設施並行設計之方法」，中華民國工業工程學會八十四年會論文集第二冊，pp. 717-724。
  59. 沙永傑、孫靜恆、陳建文，1995.12，「彈性多目標設施佈置問題之模式研究」 ，中華民國工業工程學會八十四年會論文集第一冊，pp. 144-151。
  60. 沙永傑、陳建文、孫靜恆，1995.12，「多目標設施佈置問題之穩健性模式研究」，中華民國工業工程學會八十四年會論文集第一冊，pp. 144-151。
  61. 吳鴻輝、李榮貴、沙永傑、賀力行，1995.12，「最關鍵作業與最經濟途程於加工途程規劃決策上之決定與應用」，中華民國工業工程學會八十四年會論文集第一冊，pp. 52-59。
  62. 陳建文、沙永傑，1995.07，「多目標設施佈置模式之研究」，第八屆全國自動化科技研討會論文集（一），pp. 320-327。
  63. 陳建文、沙永傑，1995.07，「改進設施佈置求解速率之研究」，第八屆全國自動化科技研討會論文集（一），pp. 314-319。
  64. 謝玲芬、沙永傑，1995.07，「區域式無人搬運車路軌系統並行設計之研究」，第八屆全國自動化科技研討會論文集（一），pp. 295-305。
  65. 沙永傑、許尚華、夏太長，1994.12，「改進飛機線束測試之網路方法」，亞太工業工程暨中國工業工程學會年會論文集，pp. 385-390。
  66. 沙永傑、黃富瑞、陳建文，1994.12，「隨機需求下設施佈置與無人搬運車路徑設計之方法」，亞太工業工程暨中國工業工程學會年會論文集，pp. 520-525。
  67. 沙永傑、黃俊雄、賀力行、李友錚，1994.12，「台灣製造業推行ISO 9000系列之現況分析」，亞太工業工程暨中國工業工程學會年會論文集，pp. 64-69。
  68. 劉建志、沙永傑，1993.11，「製造設施規劃之並行式啟發式解法」，中國工業工程學會年會論文集，pp. 530-535。
  69. Y. C. Lee, D. Y.Sha, and L. H. Ho, 1993.10, "Current Development Status of ISO 9000 Series in Taiwan R.O.C." Proceedings of the Asia Quality Control Symposium 1993, Tokyo, Japan, pp. 53-57.
  70. 沙永傑、洪榮勳、劉建志，1993.04，「工廠設施規劃之啟發式解法」，海峽兩岸工業工程學術研討會，北京。
  71. 洪榮勳、沙永傑，1992.11， 「規劃設施佈置之啟發式網路方法」 ，中國工業工程學會年會論文集，pp. 13-17。
  72. Chuen-Sheng Cheng and D. Y. Sha, 1992.07, "A Cumulative Score Control Chart for Statistical Process Control," Proceedings of the 6th Sino-Korean-Japanese Quality Control Symposium, Seoul, Korea, pp. 222-232.
  73. D. Y. Sha and Michael Shih, 1992.07, "Network Algorithm for Designing of the AGV Route System," Proceedings of the Second International Conference on Automation Technology, Taipei, Taiwan, R. O. C., Vol. 2, pp. 215-221.
  74. 沙永傑等，1992.05，「程序導向之軟體發展生產力衡量模式」，資訊工業策進會Softpro論文集，B8-1 - B8-21。
  75. D. Y. Sha, K. C. Yu, B. C. Yuan, H. K. Liang, and C. H. Huang, 1992.02, "Process-Oriented Software Development Productivity Model," Proceedings of the Third International Conference on Management of Technology, Miami, U. S. A., pp. 1300-1306.
  76. 黃呈祥、杜順榮、沙永傑，1991.11，「生產力改善障礙之研究」，中華民國八十年度中國工業工程學會年會論文集，pp. 449-454。
  77. 沙永傑、袁建中、尤克強、梁馨科、黃呈祥，1991.10，「軟體生產力衡量指標研究」 ，資訊工業策進會SEED計劃研究論文集，pp. 5-1 – 5-12。
  78. 沙永傑、黃呈祥，1991.10，「中美生產力改善技術之比較研究」，1991中華民國科技管理研討會論文集，pp. 183-187。
  79. 沙永傑、袁建中、尤克強、梁馨科、黃呈祥，1991.10，「程序導向之軟體發展生產力指標探討」，1991中華民國科技管理研討會論文集，pp. 305-311。
  80. 沙永傑、黃呈祥、楊明賢、陳金帶，1991.08，「生產力改善技術之評估」，中華民國品質管制學會民國八十年年會論文集，pp. 225-230。
  81. 沙永傑、施春豪，1991.07，「設計無人搬運車路軌系統之網路方法」，第四屆全國自動化科技研討會論文集，pp. 283-288。
  82. 董國隆、江守國、沙永傑，1988.04，「利用TESS規劃無人搬運車物料搬運系統」，第二屆全國自動化科技研討會論文集，pp. 608-616。
  83. D. Y. Sha and C. T. Su, 1986.02, "A Study on AS/RS Current Status in Taiwan," Proceedings of the Pacific Rim Productivity Conference, Institute of Industrial Engineers, Hawaii, U. S. A.
  84. 沙永傑、蘇朝敦、王孔政，1985.12，「國內自動化倉庫研究與生產力分析」，中國工業工程學會年會論文集，pp. 23-49。
  85. 沙永傑、蘇朝敦，1984.11，「有向網路中最小最大路徑問題」，中國工業工程學會年會論文集，pp. 134-140。